Nordic Teak

  • Brands Duropal
  • Product Code:R50094NY
  • Availability:Stock Available at Manufacturer
Worktop Size

Duropal's range of laminate worktops are surfaced with genuine high-pressure laminate, guaranteed to be moisture and heat resistant as well as hardwearing and easy to clean. 

Natural Wood Texture: Naturalness and precision characterise this delicate wood structure. The fine surface texture looks freshly sanded. The pores appear irregular and linear. Their different depth and edge sharpness make them look extremely authentic. Natural Wood can be universally applied to many fine-pored woodgrains. It perfectly accentuates the Scandinavian style, but also exotic- or fruit woods are given a new feel with this structure.

Quadra Profile: A 3mm radius with a unique seal designed to ensure a lifetime of protection against moisture and steam. 

Sizes Available:

  • Standard Worktops: 2050 x 600 x 40mm & 4100 x 600 x 40mm
  • Breakfast Bar Worktops: 2050/4100 x 600/670/900 x 40mm

Optional Extras: 

  • Matching Edging
  • Upstand
  • Back Panel

Cleaning & Care: 

A major advantage of Duropal worktops is that the HPL surface makes cleaning so simple. Usually a moist cloth is sufficient, but use washing-up liquid to get rid of any grease. Stubborn dirt can be removed with an organic solvent such as methylated spirits or alcohol. There‘s nothing easier than cleaning and caring for Duropal worktops.

Please do not cut or chop directly on the worktop surface – always use a chopping board or worktop saver.

Always place hot pans, ovenware and irons on a trivet or protective pad to protect the surface from the intense heat which can cause damage to the worktop if placed directly on the surface. The use of abrasive cleaners and pads, corrosive or aggressive cleaning agents should be avoided as they will have a detrimental effect on the worktop surface.

The use of PVC aprons may possibly affect the durability of the HPL on the post-formed edge of worktops. This could lead to premature wear in high traffic work areas such as in front of the sink and hob. 

Kettles, coffee machines, fryers and any other heat or damp source should not be positioned directly over worktop joints. Constant changes in temperature could cause the joint to move and eventually fail. 

Cuts and scratches will be noticeable on dark decors and gloss finishes.

Please ensure that due care is taken to correctly seal the product to prevent moisture ingress.

Write a review

Note: HTML is not translated!
   Bad           Good